Dual Active Bridge Archives - AWB Electronics https://awb-electronics.com/product-category/boards/dual-active-bridge/ Energy Converters Design Sun, 09 Feb 2025 10:47:40 +0000 en-US hourly 1 https://awb-electronics.com/wp-content/uploads/2025/02/cropped-new-logo-32x32.png Dual Active Bridge Archives - AWB Electronics https://awb-electronics.com/product-category/boards/dual-active-bridge/ 32 32 Dual Active Bridge 10KW 400V/800V https://awb-electronics.com/product/14916/ Sat, 08 Feb 2025 15:07:00 +0000 https://awb-electronics.com/?post_type=product&p=14916   Rated Data Rated Power 10KW Rated Input Voltage 800VDC Rated Input Current 12.5A Rated Output Voltage 400VDC Rated Output Current 25A Switching Frequency 100KHz Efficiency at full load ~98%         Installed Cards On the inverter SIC Drive Modules 4 drive module each one has 2 channels Control Card #1 Control Card […]

The post Dual Active Bridge 10KW 400V/800V appeared first on AWB Electronics.

]]>  

Rated Data
Rated Power 10KW
Rated Input Voltage 800VDC
Rated Input Current 12.5A
Rated Output Voltage 400VDC
Rated Output Current 25A
Switching Frequency 100KHz
Efficiency at full load ~98%

 

 

 

 

Installed Cards On the inverter
SIC Drive Modules 4 drive module each one has 2 channels
Control Card #1 Control Card DSP F280049C

 

 

Installed Industrial Communication from Inverter Board
CAN BUS #1 Port Isolated
RS485 # 1 Port Isolated

 

Protection
Active Protection Overcurrent and Over and Under Voltage
Passive Protection DSAT installed on the drive module

The post Dual Active Bridge 10KW 400V/800V appeared first on AWB Electronics.

]]> Dual Active Bridge Power Board https://awb-electronics.com/product/dual-active-bridge-power-board/ Mon, 22 Jan 2018 16:20:17 +0000 http://digi.nasatheme.com/?post_type=product&p=13453
  • *Note: Analog modules and drive boards are optional and ordered separately.

    • The post Dual Active Bridge Power Board appeared first on AWB Electronics.

    ]]>     Description:

    • Input voltage: 12Vdc up to 100Vdc.
    • Output Voltage: Up to 400Vdc
    • Ratted Power: 2KW
    • Power supply: 5Vdc power supply with reverse polarity protection
    • Digital interface: 4 PWMs signals converted to 8 PWMs in the board for saving MCUs resources.
    • Coupling inductance: 1uH, 17A can be modified on board.
    • Analog interface*:
      • 2 isolated currents sensor.
      • 2 Isolated voltage sensors for low and high side.
    • Drive boards*: 4 IGBT/MOSFET drive isolated drive modules.
    • Switching frequency: up to 100KHz constrained by power, circuit parameters and installed MOSFETs.
    • Control card: We can install DSP control card on the board.

    The post Dual Active Bridge Power Board appeared first on AWB Electronics.

    ]]>